The patient's body temperature may rise if the patient and light pad are wrapped in a material that does not allow heat to escape; such as a blanket or clothing. To minimize the heat between the light pad and the patient, the patient should not be wr
Turn off the BiliTouch and allow a minimum of 30 minutes for the light pad to cool down fully. Before restarting therapy, ensure the patient is not wrapped in order to allow heat to escape.
This alert signifies a communication issue between the lightpad and the control unit. Ensure the lightpad connector is properly attached to the control unit. The arrow symbol on the light pad connector needs to be face up when attaching. When disconn
If there is no button pressed for 10 consecutive minutes, the LCD display automatically turns off; the device will continue to operate normally. The LCD display can be turned on by briefly pressing any of the buttons on the control unit.
Do not use the device without a disposable coverPatient’s back should always be placed in the center of the lightpadAlways protect the infant with eye protection designed for use for phototherapyDo not use the device with other thermotherapy devices