1 – Motif Duo Double Electric Breast Pump. 1 – Power Adapter. 2 – 21 mm Breast Shields. 2 – 24 mm Breast Shields. 2 – 27 mm Breast Shields. 2 – Breast Shield Connectors. 2 – Tubing. 4 – Tubing Connectors. 2 – 180mL Milk Collection Containers (with l
Instructions for assembling your Motif Duo can be found here.
Unplug the pump from the charger as soon as it is finished charging. Use your pump with a fully charged battery whenever possible. Charge the pump immediately when [Lo Bt] is displayed on the LCD screen.
For safety purposes, the Motif Duo will automatically shut off after 30 minutes of use.
The Motif Duo lasts about 2.5 hours on a single charge.
The Motif Duo has a suction level of 250mmHg.
The Motif Duo is a closed system pump, which means that when used properly, there is no backflow of breastmilk into the tubing and pump. This prevents mold from growing in the pump and tubing.
Yes! All Motif collection containers, lids, caps, nipples, valves, diaphragms, breast shields, and tubing are BPA free.
Motif Duo valves, tubing, diaphragm membranes and nipples are made of non-porous silicone. Motif Duo flanges, diaphragm cases, bottles, bottle caps, locking rings and bottle disks are made of polypropylene (PP). The Motif Duo housing is made of Acryl
Yes, but coverage will vary depending on your specific insurance plan. To find a supplier who can help get your Motif Duo through insurance, use the Motif Insurance Lookup Tool.
Adapter: Input AC 100 ~ 240V (50/60Hz), Output: DC 12V/1.5A
The Motif Duo weighs less than 1 lb (.6 lbs).
A backlit screen helps you accurately see the modes, times, and levels in light or dark environments.
All Motif pumps come equipped with everything mom needs to start pumping right away, including 2 slow flow nipples.
Before using your pump for the first time, sanitize all component parts. 1. Wash your hands before touching the breast pump parts. 2. Attach the lanyard to the breast pump by using the ring on the bottom of the main body of the pump. Loop the lanyard
Preparing to Pump. Wash your hands with soap and warm water. Check each component part for wear or damage before use and replace parts as necessary. Make sure all components which have come into contact with breast milk are clean and dry. Assemble yo